Voron 0.1 V0.1 Printer Kit by LDO

This is the printer kit by LDO Motors (everything needed less printed parts)

Kit comes included with the following items:

LDO Frame

LDO V0.1 Motor Kit

LDO Rail Kit

Phaetus Dragonfly BMO

Fans

Keenovo Bed Heater 24V 60W

Raspberry Pi 3B

Buck Converter for Raspberry Pi

Meanwell Power Supply LRS-150-24

Cast Aluminum Bed

2 Flex Build Plates (1 powder coated and 1 smooth PEI) and Magnet

Acrylic enclosure

Big Tree Tech SKR Mini E3 for MCU

Detailed part list at the end of the page

Extra Goodies

Stainless steel linear rails - No more rusty rails, degrease and regrease, we will provide you with Mobilux EP2.

Machined rail nuts - 5 customer machined T nuts to secure rails online the extrusions, no more printed M2 nut holders

Brass heat set insert tool - custom machined brass heat set tip for your soldering iron. read more about it here. http://docs.ldomotors.com/guides/heatset_insert_tool_guide

Pre-cut and wired, wiring harness/loom - Kits will include all the necessary wiring, cut to the right length, crimped or soldered as required. Additional wiring guide can be found here. http://docs.ldomotors.com/voron/voron01/wiring_guide_rev_a

Two type of nuts, colour - LDO included both black oxide hex nuts and stainless square nuts. The choice of colour and material is yours.

Partially threaded screws - A small pack of partially threaded SHCS (socket head) screws (M3x30/M3x35) for the mini-afterburner toolhead, this will help to reduce wear on the idler and latch parts.

Hex wrench - Included are a few 1.5mm hex wrench.

Threadlocker - Included is a small tube of threadlocker, do use it on grub/set screws.

2mm drill bit - Use this to ream the filament path in your printed extruder parts. Included as metric drill bits are not common in some parts of the world.

RTV silicone glue - A tube of RTV silicone glue is included to secure the heater mat to your aluminum build plate. Check out this instructional video by Nero 3dp for assembly.

Additional Tips

Take advantage of the Voron on Discord: https://discord.gg/voron. The community is very active on Discord and the users are very helpful on the #voron_0_questions channel.

Download Fusion 360 and get a free license to view the 3D model of the printer. The 3D model is a very useful reference when the manual is ambiguous or unclear.

Check out Nero 3DP's Youtube channel, he has a ton of videos on assembling Voron printers.

Get a serial number once you finish building your Voron.

GUIDES

Printed Parts Guide (LDO supplement) - Are you planning on printing parts before the kit arrives? Read our supplementary print guide to see which parts to print/replace/omit.

Wiring Guide - We created this supplementary wiring guide to make wiring your printer a breeze.

Nuts in 1515 Extrusions - See our 1515 short nut guide here for tips on handling nuts in 1515 aluminum extrusions.